XPOWER METER CRANKSET:How to install the Power Meter Crankset?

1. Ensure the non-drive side preload adjuster is at zero and apply lubricant to the inside of the axle and the axle contact surface.
2. Add spacers as needed and correctly install the left and right cranks.
3. Tighten the drive side screws with an 8mm Allen wrench to a torque of 35–40 N·m.
4. Gently tap the drive side crank spindle connection with a rubber hammer to ensure there is no gap.
5. Tighten the non-drive side preload adjuster until it contacts the outer shell of the BB and tighten the screw with a 2mm inner hexagon wrench.
6. After installation, check for any crank wobble.