XPOWER METER CRANK ARM:How to solve the DFU mode?

Method 1: Quick Recovery (Recommended)

1.Connect the power meter crank with the charging cable, unplug it after charging for 5 seconds.
2.If the LED light goes out, the device has returned to normal.

Method 2: Recovery via Firmware Upgrade

Power Meter Single-sided(XPOWER)

1.Open the APP → Click settings
2.Enter the invitation code: Ga6Mwvyo06UvrXE (press Enter after input)
3.Return to the home page → Connect to the power meter
4.Long press “Official Firmware Upgrade”
5.Select XPOWER or XPOWER-R for upgrade according to the device
（The official firmware version of the power meter single-sided is 40.）

Power Meter Dual-sided(XPOWER 2X)

1.Open APP → Click settings
2.Enter the invitation code: Ga6Mwvyo06UvrXE (press Enter after input)
3.Return to the home page → Connect to the power meter
4.Long press “Official Firmware Upgrade”
5.Select the crank side that enters DFU mode:
-Left side enters DFU: Select 2X-L upgrade
-Right side enters DFU: Select 2X-R upgrade
（The official firmware version for both the left and right sides is 34）