|
FREE Returns & FREE Shipping Available

XCADEY POWER METER SIPDER:How to install my power meter spider?

POWER METER: How to install my power meter spider? 1.Remove the chain.2.Separate the original crank, spider, and chainring.3.Replace the original spider with the new power meter spider. Pay attention to the torque of the spider screws or lock caps or the chainring bolts.(Please refer to the image below.)4.After installation, check and adjust the front derailleur

XCADEY POWER METER SPIDER:What is the correct calibration method?

POWER METER: What is the correct calibration method? Calibration can be performed via APP and bike computer: APP Calibration:Open the XCADEY App → enter the connection interface → click the [Calibration] button. Bike Computer Calibration:Rotate the chain counterclockwise to activate the power meter spider, keep the bike stationary (do not ride or step on the

XCADEY POWER METER SIPDER:Why are some Easton spiders loose and others tight when installed with the crank?

POERTM METER: Why are some Easton spiders loose and others tight when installed with the crank? Different brands of crank interface have slight manufacturing tolerances, so the tightness of the connection may vary slightly. If there is an obvious abnormality after installation, you can contact the official customer service for replacement (please make sure the

XCADEY POWER METER SIPDER:What steps should be taken if calibration fails?

POWER METER: What steps should be taken if calibration fails? If calibration fails, please follow the steps below:1.Remove the connected power meter spider from the bike computer;2.Reactivate the power meter spider;3.Search for and re-connect the device;4.Perform the calibration operation again. If it still doesn’t work, you can try calibrating multiple times. It usually returns to

XCADEY POWER METER SIPDER:Is a torque wrench required for installation?

POWER METER: Is a torque wrench required for installation? Yes, it is recommended to use a torque wrench during installation to ensure a secure fit. For the connecting screws between the spider and the cranks/chainring: please tighten them with a torque wrench; (1)For the crank interface: please install it according to the torque range shown in the