xcadey.admin XPOWER METER CRANK ARM:What to do if the power data is abnormal? 1.If the calibration return value is normal, calibrate multiple times and then riding to test again.2.If still abnormal, please contact the after-sales customer service and provide a screenshot of the original purchase record or the power meter ID for after-sales service. 📧 Email:
XPOWER METER CRANK ARM:Why can’t the power meter connect to the bike computer and the app? Please troubleshoot according to the following steps: 1.Charge the power meter with the charging cable for 2 seconds, then unplug it.Try to connect the power meter with the APP again and click “Calibrate” on the connection interface. 2.Check if
XPOWER METER CRANK ARM:Why does the power meter show cadence data but no power data? 1.Check the “Power Adjust” setting in the APP-Open the APP and check if the Power Adjust is set to 0.-If so, please adjust the Power Adjust to 100%.-And recalibrate via the APP and bike computer; 2.If the Power Adjust is
XPOWER METER CRANK ARM:What is the correct charging method? Please use a 5V1A slow charger. When charging, the indicator light will remain solid red;The red light will automatically turn off when the battery is fully charged;The indicator light will flash green when the charging cable is unplugged;The full charging time is about 5-6 hours.
XPOWER METER CRANK ARM:How to solve firmware upgrade errors? Correct name on the left side (single side): XPOWER-L ID; Correct name on the right side (single side): XPOWER-R IDCorrect name on the left side (dual side): 2XPOWER-L ID; Correct name on the right side (dual side): 2XPOWER-R ID Example 1: If you get stuck in
XPOWER METER CRANK ARM:What is the latest firmware version (official version) of the power meter crank arm single-sided? The official firmware version of the power meter single-sided is 40.
XPOWER METER CRANK ARM:What is the latest firmware version (official version) of the power meter crank arm dual-sided? The official firmware version for both the left and right sides is 34.
XPOWER METER CRANK ARM:What is the normal calibration return value of the bike computer? The normal calibration return value range is 1000 ± 200.
XPOWER METER CRANK ARM:What is the correct calibration method? 一. Bike Computer Calibration (The method is same for single-sided and dual-sided) 1.Before riding, turn the chain backward several times (or ride for 1–2 minutes) to activate the power meter.2.Keep the bike stationary and the cranks at 90° vertical: the left crank is up, and the
XPOWER METER CRANK ARM:What is the battery type and battery life of the power meter crank arm? The power meter crank arm uses a built-in lithium battery, which provides approximately 150 hours of battery life under normal use.